A large solid rectangle and an open lettering design may share the same outer dimensions, but they cover very different amounts of fabric.
If the print feels heavier than you expected, look at the design and the garment together before changing press settings.
Inspect how much fabric the artwork covers
Start with the background. Does the design need a printed rectangular panel, or was that background accidentally left in the file? Removing an unwanted background can reduce coverage while restoring the intended appearance.
Next, look at the actual design. Wide solid shapes create a continuous printed area. Open spaces allow more of the garment to remain uncovered. Neither approach is automatically wrong; a poster-style graphic may intentionally need a solid panel.

Try a second layout
On a copy of the artwork, consider reducing an unnecessary backdrop, opening space between elements, or using the shirt color as part of the design. Preserve important lettering, brand colors, and the customer's approved appearance.
Using garment color in place of printed color changes the result when the same file goes onto a different blank. Keep separate approved versions and label which garment colors they suit.
A sample on your actual blank is the useful comparison.
Handle halftones carefully
A halftone represents areas with dots and open gaps. It can be useful for some designs, but the smallest dots still have to survive printing and transfer application.
Do not apply a universal halftone preset and assume it will work. Ask the transfer supplier to review the file at final size. Very small isolated elements or partially transparent edges can cause problems. DTF25 discusses thin details and fading edges on its File Setup page.
Compare samples on the intended blank
A light shirt and a heavier sweatshirt can make the same design feel different in use. Press a sample of the original and the revised layout onto the same garment style, using the supplier's complete application process.
After cooling, compare the feel during normal wear and movement. Follow the recommended care routine and inspect the washed samples. Keep the design size and application settings consistent so you can judge the artwork change.
Do not trade adhesion for a softer first impression
Shortening a required press cycle, reducing pressure below instructions, or skipping the finish is not a reliable design fix. A print that feels acceptable immediately but later lifts has not solved the problem.
- Remove accidental backgrounds.
- Review unnecessary solid coverage.
- Get approval for visible artwork changes.
- Have fine dots and fading edges checked at final size.
- Compare physical samples before ordering the batch.
Artwork changes may improve the result, but screen previews cannot guarantee how a finished transfer will feel. A sample on your actual blank is the useful comparison.
Lead image: AI editorial illustration created for DTF25. Supporting graphic: original DTF25 diagram.